(#029) Quartz Clock movement kit HIGH TORQUE motor & LONG 12" hand. CHOOSE SHAFT

Description

Message me for wholesale prices!
PLEASE READ DETAILED DESCRIPTION BELOW AS IT AFFECTS OUR RETURN POLICY!
Our #OK888 High Torque Quartz Clock I-Movement/Motor
kit includes a
metal hour and minute hands (no second hand), only a gold cap nut.  The metal hanger is optional, so please choose the device with a hanger if your project does not carry a hanger and you will need to hang the clock.
The hands comes with a plastic protection film that you peel off. The pivot holes in the hands are circular and rectangular and works only with I motors that require a nut to hold the minute hand in place.  Also comes with an instruction sheet. Requires one AA battery to operate (not included).
See information on the motors below:
(Please measure the thickness of your clock's dial/face and choose the appropriate shaft length below.)
Our 1/4" shaft #OK888 with a total shaft length of 1/2", and a threaded shaft of 1/4", therefore, we suggest that the thickness of your dial or clock's face cannot be more than 1/8" so there will be enough space to screw the nut unto the shaft to hold your dial/face in place.  The diameter of the shaft is 7mm / 1/4".
Motor dimensions: 2 2/16" x 2 2/16" x 5/8".
Mute/quiet, travel time accurate, precise degree is high
Our 1/2" shaft #OK888 with a total shaft length of 3/4", and a threaded shaft of 1/2", therefore, we suggest that the thickness of your dial or clock's face cannot be more than 3/8" so there will be enough space to screw the nut unto the shaft to hold your dial/face in place.
The diameter of the shaft is 7mm / 1/4"
.
Motor dimensions: 2 2/16" x 2 2/16" x 5/8".
Mute/quiet, travel time accurate, precise degree is high
Our 3/4" shaft #OK888 with a total shaft length of 1 1/16", and a threaded shaft of 3/4", therefore, we suggest that the thickness of your dial or clock's face cannot be more than 5/8" so there will be enough space to screw the nut unto the shaft to hold your dial/face in place.
The diameter of the shaft is 7mm / 1/4".
Motor dimensions: 2 2/16" x 2 2/16" x 5/8".
Mute/quiet, travel time accurate, precise degree is high
Our 1" shaft #OK888 with a total shaft length of 1 1/4", and a threaded shaft of 1", therefore, we suggest that the thickness of your dial or clock's face cannot be more than 7/8" so there will be enough space to screw the nut unto the shaft to hold your dial/face in place.
The diameter of the shaft is 7mm / 1/4".
Motor dimensions: 2 2/16" x 2 2/16" x 5/8".
Mute/quiet, travel time accurate, precise degree is high
Clock hook mechanism hanger
Size: 6x2cm (2 1/2" x 3/4")
Hole: 9/16" circumference.
Fits over ours and most clock mechanism shaft and will be held in place by your clock dial/face/plate. No additional washers or Nuts than the ones that comes with the motor movement are included.
WE HAVE THE ITEMS IN STOCK SO WE SHIP WITHIN 24 HOURS OF YOUR ORDER AND MOSTLY THE SAME DAY!  We strive for excellent customer service and will always try to resolve any issues a customer may have with a product purchased from us.  If for any reason you cannot leave me a 5 star rating, please first contact me by sending a message with any issues you may be having and we will rectify it.  Whether your product is damaged, not as described, or you ordered the wrong product, you'd be surprised how easily a situation can get resolved.  This way you help us to maintain a good rating and to serve you better.  We have managed to maintain a good Ebay rating not because we have never had issues, but because we have solved them all, so please consider this.
RETURNS:
We only accept returns if the item is damaged or the description does not match what is listed above.  For that we will replace it or refund your full payment, but the item must first be returned to us, we will only replace or refund what is returned.  PLEASE READ THE DESCRIPTION OF THE ITEM CAREFULLY! If you feel you have made an incorrect purchase we will accept the return, but as long as you request a refund, you will lose 30% of your payment which will cover shipping, handling and fees the item incurred when it was shipped out to you that we cannot recoup. Plus shipping back the item to us will be at your expense.  However, if you request an exchange instead then we will waive the 30% penalty charges and you pay the difference of the cost of the replaced item and the shipping cost to ship the replaced item to you
Showcase by Seller SourceBook
Product Description
Silent Clock Quartz Movement Mechanism Hands Replacement Repair Tool Kit DIY.
Feature:
*100% brand new and high quality
*High quality for durable and long-lasting use.
*Easy to install and use with long service life.
*Silent and precise during working.
*Ergonomic design for working of highly performace.
*This item comes with a continuous, smooth sweep motion that removes any ticking noise that might distract or interrupt you. The second hand moves smoothly around clock dial. This clock movement also features a high-torque motor that can drive up to lightweight, balanced clock hands.
Details:
Color: Black.
Material: Plastic & Aluminum.
Movement size: 56*56*16mm, shaft length 20mm, thread length 14mm
Clock hand size: clock 89mm, minute hand 120mm, second hand 115mm (measured from the center of the needle)
Battery: 1 AA battery (not included)
Application: panel within 8-12mm, clock face with large diameter of 30*35mm
Package Size: Approx. 16 * 7 * 4cm/ 6.3 * 2.8 * 1.6 inch(L*W*H).
Package content:
1 * Silent Clock Movement Kits for DIY Clock Replacement (Black Straight Clock Hand,Without battery)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
Payment
We accept payment via Paypal only.
Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.
Delivery details
We only
ship to confirmed Paypal addresses.
Please comfirm that your paypal address is in line with your shipping address.
Please kindly note that
the c
ombined shipping
is not provided
because the shipping fee is calculated by weight. Also, the each additional item means
exactly
the the same color and size.
It takes about
7
-15 working days to US; about 10-30 working days to other countries.
Transit time may be a little delayed because of the
bad
weather and customs
inspection
. If you
do
not receive your
item
within 30 working days since payment finished, please contact us immediately for further assistance.
Contact us
We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions,
p
lease feel free to contact us via "Ask seller a question" . We will reply your email within 24
working hours.