Classic Silent Quartz Clock Movement Mechanism Battery Powered Hand Tool DIY US

Description

Classic Silent Quartz Clock Movement Mechanism Battery Powered Hand Tool DIY US
Description:
Specifications:
Condition: 100% Brand New and High Quality !
Material: Plastic + Aluminum
Battery: 1x AA battery (not included)
#1
Host Size: 55x55x16mm(approx)
Hour hand size: 74mm(approx)
Minute hand size: 103mm(approx)
Second hand size: 137mm(approx)
#2
Host size: 5.6 * 5.6 * 5.6cm
Second hand length: 12.2cm/4.80"
Minute hand length: 9.2cm/3.62”
Hour hand length: 6.5cm/2.56
#3
Host Size: 55x55x16mm(approx)
Hour hand size: 74mm(approx)
Minute hand size: 103mm(approx)
Second hand size: 129mm(approx)
#4
Host Size: 69x55x16mm(approx)
Hour hand size: 67mm(approx)
Minute hand size: 95mm(approx)
Second hand size: 132mm(approx)
#5
Host Size: 5.2*5.2*1.8cm  (approx)
Hour hand size: 8.2cm(approx)
Minute hand size: 10.5cm(approx)
Second hand size: 13.2cm(approx)
#6
Movement size: 6.9x5.6x1.6cm, shaft length 1.3cm, thread length 0.6cm
Hour Hand Length: Approx.6.8cm
Minute Hand Length: Approx.9.8cm
Clock Diameter: Approx. 9cm
#7
Host Size: 55x55x16mm(approx)
Hour hand size: 50mm (approx)
Minute hand size: 80mm (approx)
Second hand size: 100mm (approx)
#8
Total Shaft Length: 31mm/1.22in
Thread length: 24mm/0.95in
Suitable for 16~21mm/0.6~0.8inch thickness clock panel
#9
Shaft Length: 13mm/0.5in
Thread Length: 6mm/0.24in
Host Size: 55x55x16mm/2.2x2.2x0.6in
Hour Hand Size: 75mm/2.95in
Minute Hand Size: 105mm/4.13in
Second Hand Size: 132mm/5.2in
#10
Crystal frequency: 32.768KHz
Travel time accuracy: ±30Sec/Month at 1.5V DC.25℃ (unadjusted)
Current consumption: Less than 190μA at 1.5V DC.
Working voltage: 1.3V to 1.7V
Rated voltage: 1.5V
Working temperature: -10℃to 50℃
Battery life (specification): Approx. 8 Months (UM-3)
Weight: Approximately 26g/PCS
Second hand output torque: ≤0.6gf-cm(1.5V)
Minute hand output torque: ≤40gf-cm(1.5V)
Pointer specification requirements:
Second hand length/weight: ≤130mm, ≤2g
Minute hand length/weight: ≤280mm, ≤6g
Unbalanced moment of second hand: ≤0.15gf-cm
Unbalanced moment of minute hand: ≤6gf-cm
Note:
The pointers are made of thin aluminum or iron plate after one time punch, although the packaging is good, but still can not avoid being bent during long-distance divansportation. If it occurs the situation, please slightly smooth it sdivaight by fingers. It doesn't affect usage.
The installation of pointers is skillful. Three needles should be installed separately and do not overlap as much as possible. Otherwise it will affect the performance that these pointers may not walk. Please read the notes carefully before your purchase.
ATTENTION: Quieter than ordinary clocks,still has sound,not completely silent,hope you can understand
A perfect gift for yourself or friend
Notice:
1. Please allow 1-3mm error due to manual measurement.
Please make sure you do not mind before you bid.
2. The colors may have difference as the difference of display, please understand.
Package Content:
As you choose
Message me for wholesale prices!
PLEASE READ DETAILED DESCRIPTION BELOW AS IT AFFECTS OUR RETURN POLICY!
Our #OK888 High Torque Quartz Clock I-Movement/Motor
kit includes a
metal hour and minute hands (no second hand), only a gold cap nut.  The metal hanger is optional, so please choose the device with a hanger if your project does not carry a hanger and you will need to hang the clock.
The hands comes with a plastic protection film that you peel off. The pivot holes in the hands are circular and rectangular and works only with I motors that require a nut to hold the minute hand in place.  Also comes with an instruction sheet. Requires one AA battery to operate (not included).
See information on the motors below:
(Please measure the thickness of your clock's dial/face and choose the appropriate shaft length below.)
Our 1/4" shaft #OK888 with a total shaft length of 1/2", and a threaded shaft of 1/4", therefore, we suggest that the thickness of your dial or clock's face cannot be more than 1/8" so there will be enough space to screw the nut unto the shaft to hold your dial/face in place.  The diameter of the shaft is 7mm / 1/4".
Motor dimensions: 2 2/16" x 2 2/16" x 5/8".
Mute/quiet, travel time accurate, precise degree is high
Our 1/2" shaft #OK888 with a total shaft length of 3/4", and a threaded shaft of 1/2", therefore, we suggest that the thickness of your dial or clock's face cannot be more than 3/8" so there will be enough space to screw the nut unto the shaft to hold your dial/face in place.
The diameter of the shaft is 7mm / 1/4"
.
Motor dimensions: 2 2/16" x 2 2/16" x 5/8".
Mute/quiet, travel time accurate, precise degree is high
Our 3/4" shaft #OK888 with a total shaft length of 1 1/16", and a threaded shaft of 3/4", therefore, we suggest that the thickness of your dial or clock's face cannot be more than 5/8" so there will be enough space to screw the nut unto the shaft to hold your dial/face in place.
The diameter of the shaft is 7mm / 1/4".
Motor dimensions: 2 2/16" x 2 2/16" x 5/8".
Mute/quiet, travel time accurate, precise degree is high
Our 1" shaft #OK888 with a total shaft length of 1 1/4", and a threaded shaft of 1", therefore, we suggest that the thickness of your dial or clock's face cannot be more than 7/8" so there will be enough space to screw the nut unto the shaft to hold your dial/face in place.
The diameter of the shaft is 7mm / 1/4".
Motor dimensions: 2 2/16" x 2 2/16" x 5/8".
Mute/quiet, travel time accurate, precise degree is high
Clock hook mechanism hanger
Size: 6x2cm (2 1/2" x 3/4")
Hole: 9/16" circumference.
Fits over ours and most clock mechanism shaft and will be held in place by your clock dial/face/plate. No additional washers or Nuts than the ones that comes with the motor movement are included.
WE HAVE THE ITEMS IN STOCK SO WE SHIP WITHIN 24 HOURS OF YOUR ORDER AND MOSTLY THE SAME DAY!  We strive for excellent customer service and will always try to resolve any issues a customer may have with a product purchased from us.  If for any reason you cannot leave me a 5 star rating, please first contact me by sending a message with any issues you may be having and we will rectify it.  Whether your product is damaged, not as described, or you ordered the wrong product, you'd be surprised how easily a situation can get resolved.  This way you help us to maintain a good rating and to serve you better.  We have managed to maintain a good Ebay rating not because we have never had issues, but because we have solved them all, so please consider this.
RETURNS:
We only accept returns if the item is damaged or the description does not match what is listed above.  For that we will replace it or refund your full payment, but the item must first be returned to us, we will only replace or refund what is returned.  PLEASE READ THE DESCRIPTION OF THE ITEM CAREFULLY! If you feel you have made an incorrect purchase we will accept the return, but as long as you request a refund, you will lose 30% of your payment which will cover shipping, handling and fees the item incurred when it was shipped out to you that we cannot recoup. Plus shipping back the item to us will be at your expense.  However, if you request an exchange instead then we will waive the 30% penalty charges and you pay the difference of the cost of the replaced item and the shipping cost to ship the replaced item to you
Showcase by Seller SourceBook