Dhorcas Quartz Clock Movement Kit for Replacement, 1/4" Threaded Motor 5" Hands

Description

Dhorcas Quartz Clock Movement
Please measure the thickness of your dial. This is a 1/4" thread shaft with total shaft length being 1/2". Works with dials up to 1/8" thick.
Quiet mute motor and smooth sweep second hand, no noisy tick-tock and step movement.
The diameter of the shaft is 7mm / 1/4". Make your shaft hole in your dial at least 3/8".
Includes nut and washer (not pictured)
Motor dimensions: 2 2/16" x 2 2/16" x 5/8"
Minute Hand is 5.25" to hole
Hour Hand is 4.5" to hole
Second hand is 5" to hole
Located in US.  Ships fast. Description:
Movement Hole (pinhole): Precision Hole (coarse hole)
Material: Stainless Steel, Plastic
Colour: Black
Movement Size: 5.6cm*5.6cm*1.6cm
The Total Shaft Length is 12mm and the Thread Length is 5mm.
Packing included: 1x Watch Movement
DIY Repair Clock:
Can be used to repair, replace the broken clock movement, or as a hand-made tool, this watch movement only requires a 1.5V AA battery, (note: does not contain the battery).
The time of the needle hole is 0.55cm, the diameter of the minute hand is 0.35cm, and the diameter of the second hand is 0.1cm.
Steps for installing the hands:
The first step is to install the hour hand.
The second part is to install the minute hand.
The third part is to install the second hand, the hands are all aligned at 12 o'clock, and the pointer should be kept parallel and not rubbed.
Pay special attention to the fact that the second hand does not scratch the glass to avoid time errors.
On 14-Oct-2022 at 21:52:15 EDT, seller added the following information: