DIY Quartz Battery Wall Clock Movement Mechanism Repair Tool Replace Points Set

Description

DIY Quartz Battery Wall Clock Movement Mechanism Repair Tool Replace Points Set
Features:
Total Shaft Length: 31mm/1.22in, thread length: 24mm/0.95in, suitable for 16~21mm/0.6~0.8inch thickness clock panel.
2 Pairs Decorative Clock Hands: Replacement movement parts clock kit with 2 different pairs of hands. Ornate sets for different options, perfect for your clock creations.
Accurate Time-keeping and Quiet Motor: Features high precision clock mechanism, which offers watchmaker's accuracy and dependability; equipped with a sweeping motion, no ticking.
Good DIY Clock Supply: Suitable for repairing, replacing the broken parts of a clock, or serving as good handwork material to make a clock by yourself.
Wide Application: The simple style clock movement can match to diverse colors, patterns, shapes clock panel.
Specification:
Type:Hands Quartz Clock Movement
Material:Plastic + Aluminum
Color:Black+Red
Total Shaft Length:31mm/1.22inch
Thread Length :24mm/0.95inch
Host Size:55x55x16mm/2.2x2.2x0.6inch
Second Hand Size:136mm/5.4in
Suitable for:16~21mm (0.6~0.8in) thickness clock panel
Power:Powered by one AA battery
(not included)
Warm Notice:There are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent
Note:
Please allow 1-2cm measuring deviation due to manual measurement.
Due to the different monitor and light effect, the actual color of the item might be slight different from the color shown on the pictures. Please Understand, Thanks!
Package Included:
1 X Clock Movement
2 X Hour Hand
2 X Minute Hand
1 X Second Hand
2 X Rubber Gasket
2 X Metal Gasket
2 X Screw Cap
1 x Second Cap Nut
We accept PayPal only.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Items will be shipped within 3 business day on payment received.
Items are shipped from US local warehouse via UPS&USPS&FEDEX
Delivery time depends on destination and other factors, it may takes up to 2-9 business days.
If the item is defective, please notify us within days after the receipt of the item.
The item shall be return in its original condition, in order to get it refunded or replaced.
The item is not refundable after 14 days, it will only be repaired.
Buyer is responsible for all shipping costs
We are pursuing 100% satisaction positive feedback and 5 star rating.
Please feel free to contact us before leaving a negative feedback or low DSR.
Please contact us before you open dispute on ebay and paypal, we will offer you best service.We will reply in 24 hours and solve your problem in a friendly way.
Please feel free to contact us by ebay message instead of email, we will reply all the ebay messages within 24 hours.
Certain images and/or photos used in this template are the copyrighted property of Macmillan digital publishing USA and are used with permission.
Features:
Total Shaft Length: 31mm/1.22in, thread length: 24mm/0.95in, suitable for 16~21mm/0.6~0.8inch thickness clock panel.
2 Pairs Decorative Clock Hands: Replacement movement parts clock kit with 2 different pairs of hands. Ornate sets for different options, perfect for your clock creations.
Accurate Time-keeping and Quiet Motor: Features high precision clock mechanism, which offers watchmaker's accuracy and dependability; equipped with a sweeping motion, no ticking.
Good DIY Clock Supply: Suitable for repairing, replacing the broken parts of a clock, or serving as good handwork material to make a clock by yourself.
Wide Application: The simple style clock movement can match to diverse colors, patterns, shapes clock panel.
Specification:
Type:Hands Quartz Clock Movement
Material:Plastic + Aluminum
Color:Black+Red
Total Shaft Length:31mm/1.22inch
Thread Length :24mm/0.95inch
Host Size:55x55x16mm/2.2x2.2x0.6inch
Second Hand Size:136mm/5.4in
Suitable for:16~21mm (0.6~0.8in) thickness clock panel
Power:Powered by one AA battery
(not included)
Warm Notice:There are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent
Note:
Please allow 1-2cm measuring deviation due to manual measurement.
Due to the different monitor and light effect, the actual color of the item might be slight different from the color shown on the pictures. Please Understand, Thanks!
Package Included:
1 X Clock Movement
2 X Hour Hand
2 X Minute Hand
1 X Second Hand
2 X Rubber Gasket
2 X Metal Gasket
2 X Screw Cap
1 x Second Cap Nut
PAYMENT
We accept PayPal only.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
SHIPPING
Items will be shipped within 3 business day on payment received.
Items are shipped from US local warehouse via UPS&USPS&FEDEX
Delivery time depends on destination and other factors, it may takes up to 2-9 business days.
Terms of Sale
If the item is defective, please notify us within days after the receipt of the item.
The item shall be return in its original condition, in order to get it refunded or replaced.
The item is not refundable after 14 days, it will only be repaired.
Buyer is responsible for all shipping costs
ABOUT US
We are pursuing 100% satisaction positive feedback and 5 star rating.
Please feel free to contact us before leaving a negative feedback or low DSR.
Please contact us before you open dispute on ebay and paypal, we will offer you best service.We will reply in 24 hours and solve your problem in a friendly way.
Please feel free to contact us by ebay message instead of email, we will reply all the ebay messages within 24 hours.
New Takane 4/4 Westminster Chime Pendulum Movement
This is a brand new movement, made by Takane. Can power up to 10" long hands. It has a Westminster chime that chimes as follows: 1/4 of the chime at 15 min., 1/2 of the chime at 30min., 3/4 of the chime at 45min. and a full chime and counting strike on the hour. The case size is: 3"W x 4-9/16"H x 1-1/4" Deep. Shaft diameter is 7/16".
Softer volume. Great for mounting on the back of a clock that is open. Please be aware that if you mount this inside a solid wood clock case the volume may be too low to hear. There is no volume control knob
.
There are 4 different shaft lengths to choose from:
Extra Short = threaded shaft length of 5/16", overall length of 5/8"
Short = threaded shaft length of 7/16", overall length of 3/4"
Long = threaded shaft length of 11/16", overall length of 1"
Extra Long = threaded shaft length of 15/16", overall length of 1-1/4"
Please email or leave a note with your payment telling us what hands you prefer from the pictures above. If you don't specify the hands you want we will not ship any with the order
!
This movement comes with all mounting hardware and instructions. Movement has a rear hand set knob for setting the time and requires 1 'C' battery (not included). It has an attached, enclosed tube speaker on the top of the movement.
This movement can run up to a 29" pendulum with a light weight metal rod and bob. The bob should be no more than 4.5"-5" in diameter. Please be aware that this movement cannot run the larger wood stick pendulums or Lyre pendulums used on Grandfather and Grandmother floor clocks. We recommend our empty pendulum case (code#MCA-25) or our Heavy Duty Pendulum Drive Mechanism (code#MPD-80) if your are running a larger fancy Lyre pendulum. If you want to run a single hook wood stick pendulum with a larger bob we recommend our German Chime Movement (MPC-320)
. For .00 more you can request a pendulum in the drop down menu above. The pendulum rod is 16" long and is perforated every 1" on the back so you can bend/snap it to the length you need before sliding on the bob. We also have Non-Pendulum version in our eBay store. (The second picture shows our non-pendulum version but we took a picture of the side so you can see the speaker wiring that is on both the non-pendulum and pendulum versions).
We do combine purchases to save on shipping as long as they are made on the same day. Please email us for combined shipping rates on multiple items and allow 24 hours for us to send you a combined invoice with your total. We do ship worldwide and always TRY to ship the same day payment is received.
RETURN POLICY:
Items must be returned in original condition or they will not be accepted. An exchange or refund of the purchase price will be given (your choice). Shipping is non-refundable unless the mistake is ours. Make sure you order the correct size on your items so you don't have to send them back or exchange them. We are more than willing to help you get what you need. Please call or email us with any concerns or questions before leaving feedback. We care about our customers and will work with you on any issue. If you refuse to communicate with us we will have to block you from buying from us again. Thank you.