DIY Replacement Wall Clock Quartz Movement Mechanism Fittings Parts Collectibles

Description

Product Description
Quartz Clock Movement Mechanism Repair DIY Tool Kit+Black Hands Replacement US
Features:
* 100% brand new and high quality
* Sweep silent movement type,
super silent, will not disturb sleep
* Perfect movement for repairing, replacing or making a clock.
* Made from high quality material, durable and reliable
* There are 2 types of movement: no thread snap type, thread shaft type.
* There are 6 kinds of movement with different shaft lengths:
8.9mm snap in type movement is suit for small clocks;
12.4mm shaft (4.5mm thread) is suit for 3mm thickness clock panel;
14.8mm shaft (6.1mm thread) is suit for 5mm thickness clock panel;
17mm shaft (8.6mm thread)is suit for 7mm thickness clock panel;
20mm shaft (11.1mm thread) is suit for 10mm thickness clock panel;
23.5mm shaft (15.1mm thread) is suit for 14mm thickness clock pane
Specifications:
* Working Voltage: 1.3V~1.7V
* Working current: <150 μA
* Time Accuracy: Monthly ±30 seconds
* Second Hand Torque: >0.6 (gf - cm)
* Minute Torque: >30 (gr - cm)
* Second Hand Specification:
Length≤130mm / Weight≤2g/ Non-equilibrium Torsion≤0.15g-cm
* Minute Specification:
Length≤160mm / Weight≤6g/ Non-equilibrium Torsion≤6g-cm
* Working Temperature: -10°C~50°C
* Crystal Oscillator Frequency: 32.768KHz
* Time System: 3 pointer 12 hour system
* Material: Metal, Plastic
* Color:As pictures show
* Dimension: 55×55×15mm/ 2.17×2.17×0.59inch (Approx.)
* Optional Types: 8.9mm Shaft,
12.4mm
Shaft
, 14.8mm
Shaft
, 17mm
Shaft
, 20mm
Shaft
, 23.5mm
Shaft
Package Contents:
1 * Clock Movement
Note:
The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
Payment
We accept payment via Paypal only.
Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.
Delivery details
We only
ship to confirmed Paypal addresses.
Please comfirm that your paypal address is in line with your shipping address.
Please kindly note that
the c
ombined shipping
is not provided
because the shipping fee is calculated by weight. Also, the each additional item means
exactly
the the same color and size.
It takes about
7
-15 working days to US; about 10-30 working days to other countries.
Transit time may be a little delayed because of the
bad
weather and customs
inspection
. If you
do
not receive your
item
within 30 working days since payment finished, please contact us immediately for further assistance.
Contact us
We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions,
p
lease feel free to contact us via "Ask seller a question" . We will reply your email within 24
working hours.
NEW Trigger & Timekeeping Replacement Battery Clock Movement Set with 16 Melodies
This is a brand new movement, sound module battery case, speaker, all mounting hardware and hands (if requested above). It can be used as a new movement in a clock you have built or a replacement movement set for existing sound making clocks. This particular set plays 16 melodies and will play a different song every hour then strikes the hour. Melodies include: Cuckoo Waltz, Farmer in the Dell, Fur Elise, Home on the Range, Long Long Ago, A Lovers Concerto, Tranmerci, Weigenlied, Toy Symphony, Old Black Joe, Die Lorelei, Frohlicher Landman, Home Sweet Home, Swan Lake, Hush Baby and Serenade Rampinnt. There is Automatic nigh shut-off between 9:05pm to 5:55am.
There are 2 Shaft lengths to choose from:
Small =
threaded shaft length of 1/4", overall length of 9/16"
Medium =
threaded shaft length of 5/8", overall length of 15/16"
Please make sure it will fit through the hole in your clock face/dial and reach the front but not be too long and hit any cover you may have!
The movement case size is 2-1/8"W x 2-1/8"H x 9/16"D. Shaft diameter is 5/16". Rear hand set knob for setting the time. Requires 1 'AA' battery in the movement and 2 'AA' batteries in the sound module, not included. The sound module battery compartment is 2-7/8"L x 1-1/4"W x 7/16"D. It has 5" lead wires for attachment to the Trigger movement. 7" wires are pre-attached to the speaker, circuit board, battery compartment and test button. The Trigger movement comes detached with 5" lead wires for attachment to the sound module lead wires. They simply twist together and can be covered with electrical tape. You cannot mix up the wires. They can be connected to the speaker wires any way.
We also sell the Trigger movement by itself, in our ebay store, in a pendulum or non-pendulum version plus sets that pay cuckoo bird or train sounds!
We do combine purchases to save on shipping as long as they are made on the same day. Please email me for combined shipping rates on multiple items and allow 24 hours for us to send you a combined invoice with your total. We do ship worldwide and always TRY to ship the same day payment is received.
RETURN POLICY: Items must be returned in original condition or they will not be accepted. An exchange or refund of the purchase price will be given (your choice). Shipping is non-refundable unless the mistake is ours. Make sure you order the correct size on your items so you don't have to send them back or exchange them. We are more than willing to help you get what you need. Please call or email us with any concerns or questions before leaving feedback. We care about our customers and will work with you on any issue. If you refuse to communicate with us we will have to block you from buying from us again. Thank you.