DIY Silent Classic sliver Quartz Watch Wall Clock Movement Mechanism Parts J WB

Description

High quailty and brand new.
Great for repairing, replacing or making a clock
Movement size: 5.6 x 5.6 x 1.6 cm
Second hand length: 12.3 cm
Minute hand length: 8.3 cm
Hour hand length: 6 cm
Principal axis size: 18.5 mm
Screw thread size: about 10.5 mm
Mode: silent mode
Need one AA battery.(not included)
Notification:
1 The pointers are made of thin aluminum or iron plate after one time punch, although the packaging is good, but still can not avoid being bent during long-distance transportation. If it occurs the situation, please slightly smooth it straight by fingers. It doesn't affect usage.
2 The installation of pointers is skillful. Three needles should be installed separately and do not overlap as much as possible. Otherwise it will affect the performance that these pointers may not walk. Please read the notes carefully before your purchase. These are high torque, silent sweep continuous motors that do not tick.
You can choose from 4 different shaft sizes (prices do vary for larger shaft) You have a selection of 1 set of hands that include a sweep hand. The sweep hand(second hand) has a smooth flowing motion.
*3 year factory warranty*
*Highly accurate time keeping*
*Requires 1 "AA" battery (not included)*
*Includes all of the needed mounting hardware: 1 rubber washer, 1 brass washer and 1 brass hex nut.
If you are not wanting a sweep hand(second hand), please let me know so we can give you either a brass or a black closed end nut to give your purchased motor a finished look. The end nut will not be included unless requested.
We measure the hands from the center of the mounting hole to the tip of the hand.
*OPTIONS AND SIZES*
*HANDS*
1- 1-3/8" diamond, black or brass
2 - 1-3/4" spade, black or brass
3 - 2-1/2" spade, black or brass
4 - 2-3/4" diamond, black or brass
5 - 2-1/2" serpentine, black or brass
6 - 3-1/8" black and brass
7 - 4-1/8" black or brass
8 - 2-3/4" black only
8 - 3-1/2" black or brass
9 - 2-3/8" black only
10-2-5/8" sword, brass only
10- 3-3/4" sword, black only
11- 1-5/8" black spade, NO BRASS
12-1-7/8" spade, black or brass
13-2-1/16" serpentine, black or brass
14-2-1/4" sword, black or brass
15-3" Maltese, black or brass
16-6-1/4" black (reversible black/white) with 3.5" sweep
17-2-1/2" fancy, brass only
18-3-3/8" banjo, brass only
19-1-3/4" black only
20-1-5/16" fancy, black (while supplies last) or brass
21-2-1/8" spade, black or brass
22-2-3/16" sword, black or brass
23-2-3/4" spade, black or brass
24-3" fancy, black or brass
25-3-1/4" diamond, black only
26-4" spade, black only
27-4-1/8" straight, brass only
28-DISCONTINUED
29-4-1/2" spade, black or brass
30-DISCONTINUED
31-5-1/4" spade, black
*MOTORS*
¼" Threaded shaft length, the total shaft length is 5/8" with the hand stem.
7/16" Threaded shaft length, the total shaft length is 13/16" with the hand stem.
9/16" Threaded shaft length, the total shaft length is 15/16" with the hand stem.
15/16" Threaded shaft length, the total shaft length is 1-1/4" with the hand stem.
*BLACK SWEEP HANDS(SECOND HANDS)*
1-3/8", 1-3/4", 2-3/8", 2-1/2", 2-3/4", 3" & 3-1/2"
*RED SWEEP HANDS(SECOND HANDS)*
1-3/4", 2-1/2", 2-3/4", 3" & 3-½"
YOU MAY MESSAGE ME OR LEAVE A NOTE IN YOUR ORDER IF YOU WOULD LIKE A SWEEP HAND(SECOND HAND) OR NOT.
NOTE ON MEASURING:
Shaft length is the threaded portion that must pass thru your clock face, leaving a couple of threads to mount retaining nut.
(ex., if working with 1/4" tile as your clock face....then order the 7/16" threaded shaft)
MEASURING DIAL FOR HAND SIZE: measure from top of #12 to bottom of #6, divide in half. This will give your approx. minute hand length.
For direct wall mounting, you may need a metal clock hanger. We do include the hanger (depending on your selection) in the drop dome window with the motors.
If you would like to conceal your motor, we do sell mounting hubs that have a built-in hanger on another listing. THE MOUNTING HUBS ARE NOT INCLUDED IN THIS LISTING.
If you are interested or needing a Mounting Hub, here is the link: https://www.ebay.com/itm/252226900489?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=8HRSFmE3Rca&sssrc=2349624&ssuid=8HRSFmE3Rca&var=&widget_ver=artemis&media=COPY
Feel free to check out the rest if my shop with this link:
https://ebay.com/usr/cp20111
Also, this YouTube link may be helpful:
https://www.youtube.com/watch?v=guJn-iCaHXE