-40%
Sangtai 5168S, 6168, 6168S Clock Motor + Hands - Choose model and Shaft Size
Sangtai 5168S, 6168, 6168S Clock Motor + Hands - Choose model and Shaft Size
Sangtai 5168S, 6168, 6168S Clock Motor + Hands - Choose model and Shaft Size
Sangtai 5168S, 6168, 6168S Clock Motor + Hands - Choose model and Shaft Size
Sangtai 5168S, 6168, 6168S Clock Motor + Hands - Choose model and Shaft Size
Sangtai 5168S, 6168, 6168S Clock Motor + Hands - Choose model and Shaft Size
Sangtai 5168S, 6168, 6168S Clock Motor + Hands - Choose model and Shaft Size

Sangtai 5168S, 6168, 6168S Clock Motor + Hands - Choose model and Shaft Size

$ 5.25

Availability: 354 in stock
  • All returns accepted: Returns Accepted
  • Refund will be given as: Money Back
  • Return shipping will be paid by: Seller
  • Compatible Model: n/a
  • Item must be returned within: 30 Days
  • Compatible Product: 12 hour clock motor
  • Restocking Fee: No
  • Type: Quartz Movement (Time Only)
  • MPN: 5168,6186, 6168S
  • Model: 5168S
  • Brand: Sangtai 5168S, 6168, 6168S
  • Condition: New

    Description

    Sangtai 6168, 6168S, 5158S
    Clock Movements
    Check the your specification to insure this will fit your clock Before ordering.
    Dimensions of clock motor body: 56mm x 56mm x 17mm
    All come with rubber washer , brass washer, hex nut and pictured hands
    Requires one AA alkaline battery (not included)
    Not for hands over 6 inches long.
    The millimeter (mm) is the overall total shaft length
    6168 -12mm     For dials up to 1/16" thick
    6168S -12mm   For dials up to1/16" thick
    6168 -16mm     For dials up to 15/64 " thick
    6168S -16mm   For dials up to 15/64" thick
    5168S -18mm   For dials up to 5/16" thick
    6168S -20mm   For dials up to 3/8" thick
    6168S -22mm   For dials up to 15/32" thick
    Minute and, Hour, Hand information
    This 12 hour quartz clock movement comes with black metal hands which will fit this movement.
    Minute hand measures 2-7/8 inch from the center of the mounting hole to tip and 3-7/8" overall
    Hour hand measures 2-1/8 inch from center of mounting hole to tip
    Plastic pin cap to give a finished look
    Easy to install - simply push hands on the movement shaft - pin cap goes on shaft pin
    See pictures of motor, shaft and hands
    New Laser Cut Grandfather Lyre Pendulum
    This is a beautifully ornate, brand new, Kieninger or Hermle Grandfather floor clock lyre pendulum. It is very high quality and was made in the United States. The pendulum has a 10-1/2" polished bob with a 6" laser cut fancy center (see picture). The pendulum itself (with no neck on it) is approx. 32.5 inches long (this is to the bottom of the nut and rating stem under the bob).
    Choose from the following necks:
    Hermle 94cm - Double Hook
    (overall length of pendulum with this neck is approx. 37 inches)
    Hermle 114cm - Double Hook (overall length of pendulum with this neck is approx. 44 inches)
    Kieninger 93cm - Single hook (overall length of pendulum with this neck is approx. 35 inches)
    Kieninger 116cm - Single hook (overall length of pendulum with this neck is approx. 43 inches)
    It has the nicer twisted rods (see picture). There is a rating nut at the bottom for adjusting. These are double boxed for extra safety during shipping. This will add elegance to any Grandfather clock!
    **We do sell the matching weight shells in our ebay store if you want a complete set. Thanks!**
    Shipping listed is for ONE PENDULUM
    ONLY. We do combine purchases to save on shipping as long as they are made on the same day. Please email us for combined shipping rates on multiple items and allow 24 hours for us to send you a combined invoice with your total. We do ship worldwide and always TRY to ship the same day payment is received.